Drywall Thickness and Sizes

For various products, drywall has various sheet sizes together with various thicknesses. Getting the right size drywall is important for a remodel-type or patch project.

If you want strong drywall, you should choose the thick size. This is particularly crucial in horizontal applications, such as ceilings. As time goes by, thin drywall can sag and provide your property an unenticing look.

Residential Drywall Sizes

There’s no restriction to the drywall’s lengths since drywall is produced on continuous feed lines. However, there are practical restrictions. After toward the end of the line, it’s cut to length.

Drywall can be specifically ordered, whether you need it to be 24-feet long or shorter.

Having to purchase one or more semi loads in order to get a specific cut is the only disadvantage to this. This isn’t practical for residential clients who are looking to fix a wall in their bathroom.

Importance of Drywall Size

To help minimize joints and make your next project simpler, you have to get the correct size of the drywall sheet. Handling drywall can become an issue with larger sheets of them.

The 2 major problems are:

  • Getting it into the correct area you need. It can post issues if you get the drywall up and down stairs or around corners without help.
  • Being able to physically lift and install it on your own.

Figuring Out the Thickness of Existing Drywall

You should begin by creating a hole and utilizing a tape measure to know its thickness. You can do this if you want to figure out the thickness of damaged drywall that you want to replace.

You’ve got to ensure you use extra care whenever you are assessing the thickness of drywall inside a garage or a ceiling. Usually, in these areas, thicker drywall is installed. In addition to that, plaster walls can cause a problem with thickness.

If you find a wall in your house that has a plaster and rock lath on them, it’s a kind of drywall with a thickness of 3/8 inches. This leaves you with material that’s thicker than almost every regular drywall.

Sizes of Drywall

  • 5/8 inches Cement Board – Usually, this type of cement board is utilized in commercial establishments.
  • 5/8 inches Drywall – Typically, drywall is made to be fire-resistant if it has this thickness. Usually, it’s utilized in garages and ceilings. The additional fiber makes it stronger for ceilings and more resistant to fires.
  • 1/2 inches Cement Board – Typically, this thickness of cement board will match the drywall’s thickness.
  • 3/8 inches Drywall – Before, this was the standard thickness. However, it is not commonly utilized whenever this thickness is required on a specific project. Compared to ½ inch and 5/8 inch drywall, this one is also lighter. It isn’t suggested to be utilized on ceilings because of its thickness.

If you are doing a repair or completely replacing drywalls in your house, it is ideal to contact professional drywall contractors in Chilliwack. They can easily and properly do the job for you, preventing any issues from happening in the future.

Submit a Comment

Your email address will not be published. Required fields are marked *